How to Take Apart an Xbox One Controller

How to Take Apart an Xbox One Controller

Are you ready to dive into the inner workings of your Xbox One controller?

In this guide, we’ll show you how to take apart your controller step by step. You’ll need a few tools, like a small Phillips head screwdriver, but don’t worry – the process is easier than you might think.

By following our instructions, you’ll be able to access and disconnect the internal components, giving you the freedom to customize or repair your controller.

Let’s get started!

Tools Needed for Disassembly

To take apart your Xbox One controller, you’ll need a few tools. First, grab a small Phillips head screwdriver. This will be used to remove the screws that hold the controller together. Make sure it’s the right size so you don’t strip the screws.

Next, you’ll need a plastic pry tool or a flathead screwdriver with a thin and smooth edge. This tool will help you carefully pop off the plastic pieces without scratching or damaging them.

Additionally, a pair of tweezers can come in handy for removing any small components or cables.

Lastly, have a clean and well-lit workspace, preferably with a soft surface to prevent any accidental scratches or drops.

With these tools, you’ll be ready to start disassembling your Xbox One controller.

Removing the Controller’s Screws

Start by carefully unscrewing the screws on the back of the controller. Use a small Phillips head screwdriver to loosen each screw one by one. Make sure to apply gentle pressure and turn counterclockwise until the screw is completely removed.

Once you have unscrewed all the screws, set them aside in a safe place so you don’t lose them. Be cautious not to strip the screws or apply too much force, as this could damage the controller. Take your time and be patient, ensuring that each screw is fully loosened before moving on to the next one.

Once all the screws are removed, you can proceed to the next step of disassembling the Xbox One controller.

Detaching the Controller Shell

Carefully detach the shell of the controller by gently prying it apart from the main body. Start by turning the controller upside down and locating the small tabs near the battery compartment. Use a small flathead screwdriver or a plastic opening tool to carefully insert it between the shell and the main body. Slowly work your way around the controller, applying gentle pressure to release the tabs. Take your time to avoid damaging the shell or any internal components.

Once all the tabs have been released, you should be able to separate the shell from the main body. Be cautious not to pull or twist too forcefully as there may still be delicate wires connecting the two parts.

Accessing and Disconnecting the Internal Components

After detaching the controller shell, you can access and disconnect the internal components.

Start by removing the screws that secure the circuit board to the shell. Use a small Phillips head screwdriver to carefully unscrew each one. Once the screws are removed, gently lift the circuit board from the shell. Be cautious not to damage any of the delicate wires or connectors.

You will now have access to the buttons, triggers, and joysticks. To disconnect these components, simply unplug the corresponding wires from the circuit board. Take note of their positions and orientation to ensure proper reassembly later.

With the internal components disconnected, you can now clean or replace them as needed. Remember to handle everything with care to avoid any damage.

Reassembling the Xbox One Controller

Once you have finished cleaning or replacing the internal components, it’s time to reassemble the Xbox One controller.

Start by placing the faceplate back onto the controller, making sure it aligns with the buttons and triggers.

Then, carefully reattach the backplate, ensuring that the clips snap securely into place.

Next, insert the thumbsticks back into their slots, making sure they are pushed all the way down.

Take the battery pack and slide it into its compartment, making sure it connects properly.

Finally, place the Xbox button back into its designated spot and press it down to ensure it is secure.

Once everything is in place, test the buttons and triggers to ensure they are functioning correctly.

Congratulations, you have successfully reassembled your Xbox One controller!


In conclusion, taking apart an Xbox One controller is a relatively straightforward process that can be done with a few simple tools. By following the steps outlined in this article, you can easily access and disconnect the internal components of the controller.

Remember to be careful and gentle when handling the delicate parts. Once you have finished disassembling the controller, reassembling it is just as easy. With a little patience and attention to detail, you can successfully take apart and put back together your Xbox One controller.

Leave a Reply

Your email address will not be published. Required fields are marked *